Available from
this page:
(Except where stated, the above are in PDF form)
European ITS Framework Architecture
VERSION 3
(published November 2004)
Written documents relating to the
Framework Architecture were prepared by the KAREN project in 2000.
These can be downloaded below. Version 3.0 involves modifications to
some parts of the Architecture, especially the User
Needs and Functional Viewpoint (see
the documents marked *).
The changes themselves and the reasons for making
them are explained in the
Update Notes.
(Note that it is also possible to examine parts
of the Framework Architecture using the
Browsing Tool.)
- OVERVIEW
Main 1.4MB
(Report D3.6) Guide to the documents
listed below and background to the methodology adopted in the European
ITS Framework
Architecture
- LIST OF USER NEEDS
Main 1.4MB
(Report D2.2) Introduction, description of approach
adopted, and analysis;
User Needs Database* 150KB
List of User Needs (Issue 2);
- FUNCTIONAL VIEWPOINT
Main
* 700KB
(Report D3.1) General description of
functional needs and explanation of methodology;
- PHYSICAL VIEWPOINT
Main
1.5MB (Report D3.2) Description of how functionalities can
be grouped to form usable systems
Annex 1 2MB Description of 'example systems' ;
Annex
2 1.4MB Description of functions of data stores, plus
templates
- COMMUNICATION VIEWPOINT
Main
1.7MB (Report D3.3) Description of communications links
required by systems to support the data flows
Annex 1 1.4MB List of user needs relating
to communications
Annex
2
* 1.5MB
Technologies used for communications
- COST-BENEFIT ANALYSIS
Main
1.5MB (Report D3.4) Cost and benefits of development and
implementation of framework architectures
- MODELS OF ITS
Main
1.5MB (Report D3.7) Description of the four models of ITS
and their relevance for architecture users
- Proposed Framework of Required Standards
Main
1.6MB (Report D4.1) Identifies existing standards and
protocols relevant to the Framework Architecture, recommends
future needs
- Deployment Approach and Scenarios
Main
1.6MB Presents recommendations regarding
deployment opf th ITS Architecture
- RAID Risk analysis
for ITS architecture development
Main 227MB Approach to
the constraints analysis, mitigation strategies and
recommendations
Annex 1A
139KB Red and orange risk database;
Annex 1B
64KB Yellow green and blue risk database
Annex 2A
Database description Annex 2B
Background information; Annex 2C
Risk analysis results
- CONVERGE
Best
Practice
Main
509KB Description of best practice in relation
to ITS architecture
Architecture
Update Notes
The following documents provide details of the changes made in all versions of
the European ITS Framework Architecture developed by the FRAME projects. Annex 2
of D11 (relating to version 2.0) also applies to D12 (relating to version 3.0).
- D10 - Update Notes for Version 1.1 (
MB)
- D11 -
Main
doc (259 KB) Update Notes for Version 2.0
Annex 1 (350 KB) Analysis of Update Requests and
Problem Reports
Annex 2 (725 KB) Update Request Details
- D12 -
Main
doc (303 KB) Update Notes for Version 3.0
-
GUIDE TO CONFIGURATION MANAGEMENT
D14 (PDF
zip 175KB)
Detailed indications for architecture developers on how to keep track of
the
modifications made in new versions
(issued by the project FRAME-S in April 2003)
- INTERMODALITY STUDY (zipped PDF
1.2MB)
Report D3.1 issued
October 2002
A study which
assesses whether and how to extend the European ITS Framework
Architecture to intermodal and multimodal transport
- NATIONAL VALIDATION STUDY (zipped PDF
742KB)
Report D3.2
issued February 2004
A
review of experience in national ITS architecture initiatives to
assess the 'useability' and 'usefulness' of the European ITS Framework Architecture,
plus an inventory of national ITS architecture initiatives in
Europe.
- NAVIGATION TOOL VALIDATION (zipped PDF
582KB)
Report
D3.3 issued November 2004
Development guidelines and
validation of the Browsing and Selection Tools developed by FRAME-S for
the examination and use of the Framework Architecture.
- IMPACT ANALYSIS (zipped PDF 1.48MB)
Report
D3.4 issued December 2003
An analysis of the costs and benefits of developing a Framework
Architecture
- CLUSTER REPORT (PDF 221KB)
Report D3.5 issued November 2004
Top
-
Project Brochure (Sept 2001) 958KB
explains the objectures of the FRAME Projects
-
Folder Insert
(Nov 2003) 334KB
descriptions of major FRAME-based national architectures
-
Planning a Modern Transport System: A guide to ITS
Architecture (Issue 2) (April 2004) 766KB
20-page colour brochure explaining what an ITS architecture is
and how to create one
-
About ITS (Feb 2004)
A 3-page leaflet explaining the main benefits of ITS
-
What is ITS?
(Feb 2004)
longer version of above leaflet describing some typical ITS
applications
Top
Top
|
